Tuesday, June 5, 2007

Yohen Pot Bottoms

All my unglazed pots are polished. These yohen pots fired in the firebox need the most work.

  1. First, I use a a stone (half a sharpening stone Sicarbide) Mostly on the foot, but for any big stuff on the pot
  2. Then I use coarser then fine sandpaper.
  3. then 3M green scrubbie wet.
  4. then a sheepskin buffer on my mixing drill
I learned this method during my apprenticeship at Shimaoka's. Traditionally, they used ricestraw instead of 3M pads, but they switched to the 3M pads. Also, they don't use a buffer, but instead, an appentice can polish a yohen pot for a full day with a cotton cloth. The buffer is my apprentice and it gets the job done in about 15 minutes.
Posted by Picasa

Monday, June 4, 2007

Yohen/Firebox Tea Bowl


Mogusa/Mashiko clay, iron decoration, shino glaze.
Posted by Picasa

Sunday, June 3, 2007

Firebox Tea Bowls


Shigaraki clay, faceting and inlay. Thin shino glaze

Shigaraki, hakame, Shino Glaze


Shigaraki, Faceting, Inlay, unglazed
Posted by Picasa